Vertical Wire Tubular Mount

Vertical Stainless Steel Wire Railing for Tube Mount

Each cable assembly consists of:

• 4mm diameter stainless steel rope assembly at 1100mm overall length, dropnose terminal fitted at top end
• One loose self assembly threaded terminal for the bottom rail

Vertical Balustrade Wire Railing, Tubular Mounting, Self Assembly

Delivered 2 to 3 days from order

Measuring

How to measure your vertical balustrade wires:

This product is supplied at a standard length of 1100mm

Simply order the number of individual wires required

The wire assembly is supplied with the top rail component already fitted to the wire.

You will need to size the cable on site and cut the wire to length

Then fit the simple self assembly wire terminal and screw into the threaded stud fitting.

Mounting

How to install your vertical balustrade wires:

The underside of the top rail will need 6.5mm holes to accommodate the dropnose fitting.

The bottom rail will need holes drilled through at just over 11mm

The dropnose fitting is inserted into the toprail and the drop clip will hold it in the pre-drilled holes.

Simply cut the wire to length, terminate into the self assembly stud fitting and pass through the bottom rail holes.

To finish and tension, add a nut to the protruding thread and tighten.