Tubular Mount Wire Railing

Stainless Steel Balustrade Wire Railing

Each full assembly is supplied to your specific dimensions and consists of:

• 4mm diameter stainless steel wire rope
• Two tubular mounting sockets
• One attached ball & one removable threaded ball
• One tensioning adjuster with lock nut
• Supplied complete with all relevant fixings

Delivered 2 to 3 days from order

Tubular Mount Cable Rail, Ready Assembled

How to Measure

How to measure your wire assemblies:

To order, enter the exact length of deck railing cable assemblies at Step 2. Measure the distance between the centre of the inside faces of the tubular fixing posts to the millimetre.

Remember - measure twice, cut once! Be as accurate as possible. Each cable has an adjustment of plus or minus 20mm.

TIP: You can run wires up to 10 metres passing through any intermediate posts to minimise the number of cables you'll need!

Mounting

Feeding through posts:

The wires can run up to 10 metres in length and the threaded ball can be unscrewed allowing you to feed the wire through any intermediate tubular posts (you'll need a clearance hole of at least 7mm).

Mounting:

These balustrade wires are designed for fixing to tubular stainless steel posts using a scalloped socket and M6 screw.

You will need to drill and tap an M6 hole into the posts to accept the socket and screw. ('tap' refers to the method of drilling a hole whilst adding an internal thread. A special drill bit is required to achieve this.)

CLICK the images below to see the mounting process

Brochure

WIRE BALUSTRADE RAILING SYSTEM BROCHURE download here